Profloor Dynamic Strip
Product Description
Profloor Dynamic Strip System is designed for new build and the refurbishment of existing timber floors is nailed or stapled using the fixing lugs provided to the timber joists. Significant improvement in Impact Sound Insulation can be obtained when using Profloor Dynamic Strip System under the chosen floor finish.
The Profloor Dynamic Strip System utilises the same advanced foam technology as the Profloor Dynamic Battens to provide an impact isolation superior to that achieved using fibre quilt. Profloor Dynamic Strip has been developed in conjunction with Building Scientists at Heriot - Watt University. The use of Profloor Support Strip is recommended around the perimeter of all rooms and in areas such as bathrooms and kitchens where the load could exceed 1.4KN. The 3rd element of the Dynamic Strip System is the use of a 5mm Profloor Flanking Strip to isolate the acoustic floor from the wall and skirting board.
Mechanical fixings must not be used with this product with the exception of the fixing lugs. The plasterboard plank or selected floor finish must be bonded to the Profloor Dynamic Strip using Profloor PVA adhesive. We recommend that tongued and grooved flooring is bonded using Profloor adhesive. It is intended that under normal domestic load the double foam system will compress by between 6mm - 8mm.
Benefits
- Covered by BBA.
- Foams do not degrade over time.
- Used primarily on timber floors.
- Lug fixing eliminates risk of nail penetrating foam when being fixed. · Foam resistant to biological attack.
- Improves Impact sound primarily but can also improve airborne sound.
- Fixing lugs reduce the risk of timber to timber squeak.
- Dynamic Strip and Support Strip are colour coded to help when installing.
- Foams will not delaminate if attacked by moisture.
Technical Information
COSHH SheetCurrently Unavailable