Profloor Levelling System

Product Description

The Profloor Levelling System was developed in order that a level finished floor could be laid on a cambered stepped or uneven subfloor. The system will contribute towards meeting the statutory impact and airborne requirements of the Building Regulations depending on the subfloor construction.

Levelling bases are manufactured from injection moulded High Grade Polymer size 70 x 100mm in three types: L M type with 10mm uncompressed foam bonded to the base. Type H is for deeper floors with the foam bonded to softwood inserts of different thickness which fit under the levelling base. Type L - requires 21mm thickness battens - floor depth minimum 51mm up to 67mm. Type M - requires 33mm or 45mm thickness battens with packing - floor depth minimum 63mm up to 91mm with 33mm battens with packing. - floor depth minimum 75mm up to 103mm with 45mm battens with packing. Type H - requires 45 mm thickness battens - floor depth minimum 93mm up to 203mm with packing. All floor depths include 18mm boarding supplied by others Key Features Can provide impact and airborne sound insulation only on concrete floors with a mass greater than 300Kg/m2.

Benefits

Provides a level finished floor on uneven sub-floor eliminating costly remedial work.
Services can be placed in cavity created.
Quick to install.
No need to glue packing pieces.
Total floor depth of system included an 18mm board finish that can be as low as 48mm and as high as 200mm.
Allows for application of a variety of floor surfaces i.e. chipboard plywood or hardwood.
Dry construction means no drying out delays.