Isover Hi-Therm
Product Description
Foil-faced glass mineral wool slabs for partial-fill insulation of masonry cavity walls to meet the thermal requirements of Part L 2006 (England and Wales) and Section 6 (Scotland).
Description Non-combustible, silicone-impregnated, water repellent glass mineral wool slabs, faced on one side with a vapour permeable low emissivity reinforced foil. The product is supplied in a variety of thicknesses, with a 1200mm x 455mm dimension, compatible with conventional wall tie spacing. The slabs are installed between the wall ties with the foil facing adjacent to the residual cavity and with the reverse fibrous side against the inner leaf.
Non-combustible, silicone-impregnated, water repellent glass mineral wool slabs, faced on one side with a vapour permeable low emissivity reinforced foil. The product is supplied in a variety of thicknesses, with a 1200mm x 455mm dimension, compatible with conventional wall tie spacing. The slabs are installed between the wall ties with the foil facing adjacent to the residual cavity and with the reverse fibrous side against the inner leaf.
Non-combustible, silicone-impregnated, water repellent glass mineral wool slabs, faced on one side with a vapour permeable low emissivity reinforced foil. The product is supplied in a variety of thicknesses, with a 1200mm x 455mm dimension, compatible with conventional wall tie spacing. The slabs are installed between the wall ties with the foil facing adjacent to the residual cavity and with the reverse fibrous side against the inner leaf.
Non-combustible, silicone-impregnated, water repellent glass mineral wool slabs, faced on one side with a vapour permeable low emissivity reinforced foil. The product is supplied in a variety of thicknesses, with a 1200mm x 455mm dimension, compatible with conventional wall tie spacing. The slabs are installed between the wall ties with the foil facing adjacent to the residual cavity and with the reverse fibrous side against the inner leaf.
Product Literature